Lumenera Lt-C1610, User Manual

Page: 72 / 144

66 • Feature Reference Teledyne Lumenera Lt Series
Display Name Feature & Values Description Device
Version
& View
Trigger Selector TriggerSelector Selects which type of trigger to configure with
the various Trigger features.
1.00
Beginner
Single Frame Trigger(Start) FrameStart Selects a trigger starting the capture of a single
frame. Frame size is determined by image
format feature "Height".
MultiFrame Trigger(Start) FrameBurstStart Selects a trigger to capture multiple frames. The
number of frames is specified by the
triggerFrameCount feature.
Trigger Mode TriggerMode Controls if the selected trigger is active.
1.00
Beginner
Off Off Disables the selected trigger.
On On Enable the selected trigger.
Trigger Software TriggerSoftware Generates an internal trigger. TriggerSource
must be set to Software.
1.00
Beginner
Trigger Source TriggerSource Specifies the internal signal or physical input
Line to use as the trigger source. The selected
trigger must have its TriggerMode set to On.
1.00
Beginner
Software Software Specifies that the trigger source will be
generated by software using the
TriggerSoftware command.
Line0 Line0 Specifies which physical line (or pin) and
associated I/O control block to use as external
source for the trigger signal.
Line2 Line2 Specifies which physical line (or pin) and
associated I/O control block to use as external
source for the trigger signal.
Line3 Line3 Specifies which physical line (or pin) and
associated I/O control block to use as external
source for the trigger signal.
Trigger Activation TriggerActivation Specifies the activation mode of the trigger.
1.00
Beginner
Rising Edge RisingEdge Specifies that the trigger is considered valid on
the rising edge of the source signal.
Falling Edge FallingEdge Specifies that the trigger is considered valid on
the falling edge of the source signal.
Trigger Delay TriggerDelay Specifies the delay in microseconds to apply
after receiving the trigger and before activating
the triggerEvent.
1.00
Beginner
Trigger Frames Count triggerFrameCount Sets the maximum number of frames to acquire
when a valid trigger is received. This feature is
available when Trigger Selector = MultiFrame
Trigger(Start).
1.00
Beginner
Strobe Mode StrobeMode Enables/disables the strobes in snapshot mode.
1.00
Beginner
Off Off Strobe Is Off
On Trigger OnTrigger Strobe fires on the trigger.
Strobe Delay StrobeDelay Trigger to strobe delay
1.00
Beginner
Strobe Duration StrobeDuration Strobe length
1.00
Beginner
Strobe Source StrobeSource Output physical line (pin) used to generate the
strobe signal.
1.00
Guru
Line 1 Line1 Line 1
Line 2 Line2 Line 2
Line 3 Line3 Line 3
Line Selector LineSelector Selects the physical line (or pin) of the external
device connector to configure.
1.00
Beginner