Lumenera Lt-C1610, User Manual

Page: 78 / 144

72 • Feature Reference Teledyne Lumenera Lt Series
5.6 Lens Control (for LT-Ux0x-xxxxx series)
The LT-Ux0x-xxxxx Series lens control has parameters used to configure features controlling
motorized iris lens. Parameters in gray are read-only, either always or due to another parameter
being disabled. Parameters in black are user programmable via an imaging application.
Features listed in the description table but tagged as Invisible are usually for third-party software
usage—not typically needed by end-user applications.
5.6.1 Lens Control Feature Descriptions
The following table describes the features and values found in the category, as well as the device
version and visibility level (beginner, expert, guru, invisible). The device version represents a
camera software functional level (different from the firmware revision number) and may differ for
each camera sensor. A major device version release is shown in green . The last column also
indicates whether the feature is a member of the DALSA Features Naming Convention (DFNC) or
the GenICam Standard Features Naming Convention (SFNC, tag not shown).
Display Name Feature & Values Description Device
Version
& View
F-stop iris F-number setting. The larger the number the
smaller the aperture.
1.00
DFNC
Expert