Lumenera Lt-C1610, User Manual

Page: 75 / 144

Teledyne Lumenera Lt Series Feature Reference • 69
Note that these optimal values depend on camera settings, so that modifying the settings may
induce changes to the flash zone values. Again, it is up to the user to re-enter the Output Line
Pulse Delay and Output Line Pulse Duration values when necessary.
See section Overview of Electronic Rolling Shutter (ERS) Exposures for details.
To Use Strobe and Flash Zone in Video/Free Running Mode (Electronic Rolling Shutter)
1. Set Line Selector to Line 3 (only option for video).
2. Set Line Mode to Output.
3. Set Output Line Source to Pulse on: Start of Exposure.
4. Set Output Line Pulse Delay to the value found in Flash Zone Delay.
5. Set Output Line Pulse Duration to the value found in Flash Zone Duration.
To Use Strobe and Flash Zone in Still/Triggered Single Frame Mode (Global Reset
Release Shutter)
1. Set Trigger Mode to On to set the camera to still/single frame.
2. Set Line Selector to Line 1, 2, or 3.
3. Set Line Mode to Output.
4. Set Output Line Source to Pulse on: Start of Exposure.
5. Set Output Line Pulse Delay to the value found in Flash Zone Delay.
6. Set Output Line Pulse Duration to the value found in Flash Zone Duration.