SKAARHOJ DEVICE CORES
Device: Panasonic AG-CX350
Introduction
The Device Core “Panasonic CX350” is used for controlling the AG-CX350 and AG-CX10 cameras. The
goal of this manual is to help configuring a SKAARHOJ interface to control features available in the Device
Core at this present time.
Multicam Control
Please notice with the release of UniSketch v2.4.16 Multicam Control have been enabled. Prior to v2.4.16
only a single camera could be controlled from the Device Core. With the update up to 4 cameras can be
controlled from a single Device Core. Please see information in the section “Multicam Control”
Setting up Camera
In order to control the camera it must be connected to the same network as your SKAARHOJ Controller..
All communication between a SKAARHOJ interface and the camera is done via IP. The implementation
have been done on version 1.01-00.0.00
1
