LubriMist
®
Model JD
Oil Mist Generating System
Installation and Operating Manual
Page 65 of 152
Press [ENTER] again
Conditions for select system variables are also recorded as each event is recorded.
By once again pressing the ENTER key the screen displays select system
operating values valid at the time the queried event occurred. Note that the values
are not labeled, however they are displayed in a specific order and location on the
LCD. The diagram below shows the location for the value of each system variable.
AA = Air Temperature
BB = Mist Pressure
CC = Regulated Air Pressure
DD = Oil Reservoir Level
EE = Mist Density
Press [ENTER] again
Pressing the ENTER key returns the screen to the event identification screen.
Using the ENTER key displays in circular order the event identification screen,
the time and date screen
system variable screen
Note:
1. When any event number is being queried, using the ENTER key displays in circular order the event
identification screen,
the time and date screen
system variable screen
2. While viewing any screen, the
and
keys can be used to quickly scroll through the events in
order of their occurrence. . As event numbers are scrolled the same screen is displayed.
3. To exit the event log mode press the CLEAR key once.
4. The EVENT LOG can be cleared from memory by pressing [SET] [SET] [CLEAR]. Once entries are
cleared they are not retrievable.
_ AA __ BB __ CC __
_ DD __ EE __