manualshive.com logo in svg

LubriMist JD, Installation And Operating Manual, Page: 11 / 152

Share
Download
LubriMist JD Installation And Operating Manual Download Page 11

 

LubriMist

®

 Model JD 

Oil Mist Generating System 

Installation and Operating Manual 

Page 11 of 152 

 
 

LubriMist® Model JD Model Code Designations 

 

Electrical Standard: 

The LubriMist® Model JD Oil Mist Generator is available in models designed to comply with either North 
American or European electrical standards. The first entry of the JD model code designates the 
electrical standard used. 

 

Equipment designed to the North American standards is compliant with Article 501 and 505 of 
the National Electrical Code (NEC). The NEC version of the LubriMist® Model JD is suitable for 
use in Class I, Division 2, Groups B, C, D hazardous areas with a temperature code of T3C.  

 

 

Inlet Power: 

The LubriMist® Model JD is available for connection to either 115 or 230 VAC single-phase power. The 
purchaser specifies the supply voltage. 
 

 

Labeling: 

Designates the language used in the operator interface when displaying messages.  

 

 

Mist Density Monitor: 

The optional Mist Density Monitor measures changes in the density of the oil mist as it is generated. 
 

 

Auxiliary Unit: 

The Auxiliary unit is recommended in conditions where complete shutdown of the LubriMist® Model JD 
Oil Mist Generator is unacceptable.  The Auxiliary unit allows the user to perform general maintenance 
on the JD main unit without losing oil mist flow to the system. 
 

 

Cabinet Accessories: 

Several accessories are available when certain environmental and ambient conditions can be expected. 
These options are recommended where aggressive or extreme site conditions exist. The options are 
designed to improve operational reliability and reduce long term maintenance.  The Air Cooling option 
should be used when equipment is to be installed in locations where extremely hot ambient 
temperatures may be encountered. The Air Purging option is recommended where extremely corrosive 
atmospheres may be encountered. For a complete description see 

Optional Equipment 

under the 

PRODUCT DESCRIPTION section of this manual. 

 

 

 

EXPLOSION HAZARD – Substitution of 
components may impair suitability for Class 
I, Division 2

 

W

A

R

N

I N

G

Summary of Contents for JD

























































































































































Reviews:

No comments