manualshive.com logo in svg

LubriMist JD, Installation And Operating Manual, Page: 60 / 152

Share
Download
LubriMist JD Installation And Operating Manual Download Page 60

 

LubriMist

®

 Model JD 

Oil Mist Generating System 

Installation and Operating Manual 

Page 60 of 152 

 
 
 
 
7a) Press [ENTER] 

This control specifies whether a mist density meter option has been 
installed, or if one is to be added at a later date. Use the INC and DEC to 
toggle between YES and NO. The default is YES. (Yes = Mist Monitor 
Installed, No = No Mist Monitor Installed). 

             

                                                     

 

 
7b) Press [ENTER] 

When the Mist Density Metter is an included optional feature, this control 
specifies whether the user wants to utilize the High Mist Density. Use the 
INC and DEC to toggle between the ENABLE and DISABLE. The Default is 
ENABLE. 

 

 

 

 

(Enable = High Alarm Active, Disable = High Alarm Inactive). 

 

 

 

 
8) Press [ENTER] 

Communication and option feature set-up is complete.  

 
 
 
 

Mist Dens Option 

 

YES 

Mist Dens Hi Alm 
ENAB

 

Summary of Contents for JD

























































































































































Reviews:

No comments