Connection of detectors Labor Strauss
Chapter 2 • Conventional technology
17
2.2.2
Connection of Manual Call Points Series HME
Connecting the mains voltage 230VAC to the change-over contacts 11, 12 and 14 is only permis-
sible for the type HME/FFFF/12/TT/LL/N (with N standing for mains voltage)! It differs from
the type HME/FFFF/12/TT/LL in that it has additional covers for the insulation of the mains
voltage. The instructions on the safe use, which can be found in the enclosed packet, must be
strictly observed!
Address modules are connected to the Manual Call Points Series HME in the same way as to the
Manual Call Points Series HFM/HM. The connection of these manual call points is shown in Chapters
2.2.1.1 and 2.2.1.2.
Connection-LST.odt / 2009 / AN9161298
200/17
17
