Lowrance GlobalMap Sport Installation And Operation Instructions Manual Download Page 61 | Manualshive

Page: 61 / 61

background image

61

How to Obtain Service - U.S.A. Only

We back your investment in quality products with quick, expert service
and genuine Lowrance

®

replacement parts. If you're in the United States

and you have questions, please contact the Factory Customer Service
Department using our toll-free number listed below. You must send the
unit to the factory for warranty service or repair. Please call the factory
before sending the unit. You will be asked for your unit's serial number
(shown above). Use the following toll-free number:

800-324-1356

U.S.A.only. Monday through Friday 8:00 A.M. - 8:00 P.M. Central time, except holidays.

Your unit is covered by a full one-year warranty. (See the back of this flyer
for complete warranty details.) If your unit fails and the failure is not cov-
ered by the original warranty, Lowrance has a flat-rate repair policy that
covers your unit and accessories packed with the unit at the factory. There
is a 180-day warranty on all non-warranty repairs from the factory, which
is similar to the original warranty, but is for 180 days rather than one year.
For further details, please call us at the above number.

On factory repairs, we guarantee your unit will be repaired in three work-
ing days from the time it is received. This does not include shipping time.
If for some reason we cannot meet this commitment, we will extend your
warranty for another full year, free of charge, from the date of repair.

Lowrance also gives you free UPS shipping from anywhere in the conti-
nental United States both to and from the factory for all warranty repairs.
You can also use the enclosed UPS shipping label for non-warranty ship-
ments. See the inside of this flyer for more information.Remember, non-
warranty repairs are subject to Lowrance's published flat-rate charges
and 180-day warranty. A 3 working day turnaround time at the factory
repair center is guaranteed. (Does not include shipping time.)

LITHO IN U.S.A.

988-0129-34

Your unit's serial number

«
...
59
60
61

Summary of Contents for GlobalMap Sport






























































Reviews:

No comments

Related manuals for GlobalMap Sport

Brand: Dash Pages: 55

Brand: Garmin Pages: 2

Brand: Garmin Pages: 2

POCKET LOOX N100 series

Brand: Navigon Pages: 2

Brand: Navigon Pages: 180

Brand: Navig8r Pages: 55

Brand: Simrad Pages: 32

Brand: Haicom Pages: 41

Brand: Garmin Pages: 336

Brand: SkyGolf Pages: 16

Brand: Gator Pages: 22

RoadMate 9200-LM

Brand: Magellan Pages: 45

Brand: SVR Pages: 2

Apollo SL50 GPS

Brand: II Morrow Inc. Pages: 62

Brand: SafetyTracer Pages: 6

Brand: Qstarz Pages: 2

Brand: Qstarz Pages: 4

BT-Q1200 Super 99

Brand: Qstarz Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands