Lowrance GlobalMap Sport Installation And Operation Instructions Manual Download Page 60 | Manualshive

Page: 60 / 61

background image

60

How to Obtain Service
(Canadian Customers Only)

We back your investment in quality products with quick, expert service and genuine
Lowrance replacement parts. If you need service or repairs, contact the Lowrance
Factory Customer Service Department at the toll-free number listed below. A techni-
cian may be able to solve the problem and save you the inconvenience of returning your
unit. You will be asked for your unit's serial number.

800-324-1356

Canada Only. Monday through Friday 8:00 A.M. - 8:00 P.M. Central Time.

When sending a product for repair, please do the following:
1.

Always use the original shipping container and filler material the product was packed
in when shipping your product.

2

Always insure the parcel against damage or loss during shipment. Lowrance does
not assume responsiblity for goods lost or damaged in transit.

3.

For proper testing, repair, and service, send a brief note with the product describing
the problem. Be sure to include your name, return shipping address, and a daytime
telephone number.

How to Obtain Service
(International Customers Only - Except Canada)

If you need service or repairs, contact the dealer in the country you purchased your
unit.

WARRANTY REPAIR WILL BE HONORED ONLY IN THE

COUNTRY UNIT WAS PURCHASED.

Please follow the shipping instructions shown below on this page if you have to mail
your unit to the dealer. For proper testing, repair, and service, send a brief note with the
product describing the problem. Be sure to include your name, return shipping ad-
dress, and a daytime telephone number.

Accessory Ordering Information - All Countries

To order accessories such as power cables or transducers, please contact:
1.

Your local marine dealer. Most quality dealers that handle marine electronic equip-
ment should be able to assist you with these items. Consult your local telephone
directory for listings.

2.

Canadian customers only can write:

Lowrance/Eagle Canada, 919 Matheson Blvd., E. Mississauga, Ontario L4W2R7

or fax 416-629-3118

«
...
58
59
60
61
»

Summary of Contents for GlobalMap Sport






























































Reviews:

No comments

Related manuals for GlobalMap Sport

Brand: Garmin Pages: 16

Brand: Raymarine Pages: 75

Brand: Nelso Pages: 9

Brand: RTITraq Pages: 14

Brand: Spytec GPS Pages: 3

Brand: RUPTELA Pages: 41

Brand: RUPTELA Pages: 50

Brand: REWIRE SECURITY Pages: 35

Brand: TomTom Pages: 42

Brand: TomTom Pages: 142

Brand: astra telematics Pages: 4

Brand: astra telematics Pages: 4

Brand: astra telematics Pages: 5

Brand: astra telematics Pages: 28

Brand: REWIRE SECURITY Pages: 24

Freebird 50.7HD-DVBT

Brand: Lark Pages: 122

Brand: CHIEF Pages: 2

Brand: Packard Bell Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands