Chapter 7 Menus and Toolbars 123
Next group of Marks (
)
This command will show the readings recorded between the
last inspection mark shown and the next inspection mark
recorded. This command will only be available if the "Zoom
to Marks" command is enabled and the last reading recorded
is not currently visible.
Options
(see "Customizing the
software" on page 86)... (
)
This will open a window allowing you to customize the
software. This command is further explained in the chapter
"
Customizing the software
(on page 86)".
LogTag Menu
The "LogTag" menu contains commands that generally relate to the usage and interaction
with LogTags.
The following table outlines the commands and the explanation of each command that
may appear in the "LogTag" menu when using the LogTag Analyzer software:
Command
Explanation
Configure
(see "Getting a
LogTag ready for use" on
page 27)...
This will display a wizard to help you through the necessary
steps to prepare LogTags for their next use. This command is
explained in further detail in the chapter "
Preparing LogTags for
use
on page 26".
Download
(see "Getting
results from LogTag" on
page 48)...
This will display a wizard to help you through the necessary
steps to retrieve a copy of the recorded readings stored within
the LogTag(s). This command is explained in further detail in
the chapter "
Results from LogTag
(on page 47)".
Hibernate...
(see
"Prolonging battery life" on
page 45)
This will display a wizard to help you through the necessary
steps to set LogTags to "Hibernation" mode. This command is
explained further in the chapter "
Prolonging battery life
(on
page 45)"
Wizard
(see "Get a LogTag
ready for use" on page
16)... ( )
This will display a wizard to help you through the necessary
steps to retrieve a copy of the recorded readings stored within
the LogTag(s) and then prepare the LogTags for their next use.
This command is explained in further detail in the chapter
"
Quick Start Guide
(on page 13)".
Summary of Contents for Analyzer
Page 1: ...2 0...
Page 23: ...Chapter 3 Quick Start Guide 23 Only flashes if no alert condition is present...
Page 170: ......