48
5
Press
to select ‘OK’, then press
ENTER
to save the setting and return to the Timer
Record menu.
Press
to select ‘Cancel’, then press
ENTER
, if you would like to discard current
setting.
6
Press
to select another item on the list,
and press
ENTER
if you want to set up more
Timer Record programs.
If not, select ‘Exit’, then press
ENTER
. Or
press
TIMER
to exit the Timer Record Menu.
7
Switch off the DVD recorder to activate the
timer recording function.
Note
• You need to switch off the DVD recorder to
activate the Timer Record function.
• If you want to return to the Date/Time mode,
press
to select ‘Date/Time Setting’,
then press
ENTER
. However, please note that all
the settings you have entered will be cleared once
you exit the present setup screen.
Why This Happened
Why is my preset program not completely
recorded?
Incomplete recording may be resulted by:
1. Insufficient disc space
If there is not enough space on the disc, your preset
program can only be partially recorded depending
on the amount of capacity available.
2. Overlapped Timer Program settings
The unfinished recording may occur when time
settings of two Timer Programs overlap. Under the
circumstances, the DVD recorder stops recording
the earlier program at the start time of the later
program.
