Lipco GSG-AN-VM, Translation Of Original Instructions, Page: 55 / 72

Operating instruction Saddle-mount fan unit with tank trailer GSG-AN-VM
55 - 72 011170-05-EN BA GSG-AN-VM / 2019-01-16
25. Cleaning of GSG-AN-VM after use
Clean the machine on an untreated surface on the field.
Clean the machine with a spraying gun, which is supplied by water
out of the fresh water tank.
•
After use, clean the GSG-AN-VM thoroughly inside and outside
using plenty of water; sodium carbonate can be added for better
results.
•
For the cleaning process itself, move the fan units to the closest
position and switch on the pump, nozzles and suction unit.
•
To clean the pump, fittings and hoses, fill the fresh water tank
with water and operate the pump for a short period. Actuate all
fittings several times in order to ensure thorough cleaning.
•
Take special care in cleaning nozzles and filters; it may even be
necessary to dismantle these parts to check for wear or damage.
Replace worn or damaged parts.
When spraying the machine, also retract all hydraulic cylinders in
order to prevent corrosion on the piston rods.
Suction filter cleaning:
.
Fig. 34 3-way-valve Fig. 35
•
To clean the suction filter, set the 3-way valve to the middle posi-
tion “Clean suction filter” (Fig. 35)
The supply of spray liquid to the suction filter will now be shut-off
and the filter cartridge can be removed for cleaning.