Lipco GSG-AN-VM, Translation Of Original Instructions, Page: 27 / 72

Operating instruction Saddle-mount fan unit with tank trailer GSG-AN-VM
27 - 72 011170-05-EN BA GSG-AN-VM / 2019-01-16
15. Attachment of the universal joint shaft
•
Prior to connecting or detaching the universal joint shaft, always
make sure to switch off the power take-off shaft and motor and to
remove the ignition key!
•
Press pin and push the universal joint shaft onto the power take-
off shaft until the pin locks into place! (Fig. 16)
Fig. 15 Fig. 16
•
After connecting the GSG-AN-VM to the tractor, check the length
of the universal joint shaft.
•
Caution!
Maximum overlapping is desirable. Minimum overlapping is
0.5xOL = 50% of maximum overlapping OL. (See Fig. 15)
•
When connecting to a different tractor, check the length again!
•
When the machine is not in use, locate the universal joint shaft in
the support provided for this purpose.
•
When connecting the universal joint shaft to the machine, make
sure that the protective cover covers completely the universal
joint shaft guard in all operating positions!
•
For your personal safety, replace damaged or worn protective
devices immediately.