![background image](http://html1.mh-extra.com/html/lipco/gsg-an-vm/gsg-an-vm_translation-of-original-instructions_1926990031.webp)
Operating instruction
Saddle-mount fan unit with tank trailer GSG-AN-VM
31 - 72
011170-05-EN BA GSG-AN-VM / 2019-01-16
18. Operating the LIPCO GSG-AN-VM
•
Caution:
Do not use plant protection agents that tend to gum up or con-
geal
– they have a negative effect on spraying.
18.1. Determining the amount of spray liquid needed
The amount of spray liquid needed, which depends on the re-
spective culture, the type of plant protection and the effective-
ness of the plant protection agent, can be found in the instruc-
tions for the plant protection agent.
•
The working width (in meters) corresponds to the row width per
tunnel.
•
The approximate driving speed (km/h) can be read from the
speedometer of the towing vehicle.
In order to take into account any slippage in the drive wheels,
this should be checked directly on the field.
A driving speed of 5 to 7 km/h is recommended for spraying.
18.2. Checking the driving speed
•
Mark off a path with a length of 100 m.
•
Select a gear and engine speed to achieve the desired speed.
•
Drive the marked distance and record the time needed.
•
Calculate the driving speed or use the conversion table.
•
Adapt the RPM, if necessary, and repeat the procedure until the
desired driving speed has been attained. Record the results in
writing.
Summary of Contents for GSG-AN-VM
Page 72: ...Design mail bauer ib com...