![background image](http://html1.mh-extra.com/html/lipco/gsg-an-vm/gsg-an-vm_translation-of-original-instructions_1926990038.webp)
Operating instruction
Saddle-mount fan unit with tank trailer GSG-AN-VM
38 - 72
011170-05-EN BA GSG-AN-VM / 2019-01-16
18.8. Spray nozzle adjustment
•
To switch off a nozzle, turn it
either 90° downward or 90°
upward. (Fig. 21)
Fig. 21
The nozzles used have the following positions:
- 90 degrees / straight down stop
0 degree / horizontal
for spraying before blossoming
15 degrees / upward
not used
20 degrees / upward
for spraying after blossoming
90 degrees / straight up
stop
The correct setting of the nozzles is supported by a noticeable
click when turning the nozzle up or down.
•
For all spraying, make sure that the center of the fan units is
aligned to the center of the plants, so that the distances between
the nozzles and the plants are the same on both sides of the
tunnel.
•
For bud burst spraying, a narrow fan unit can be used, which has
a positive effect on the return quantity.
The spray cones should overlap on the foliage wall in order to
achieve optimum distribution.
If the fan unit wall is too close to the foliage wall, the spray cones
may no longer overlap and there will be areas in the foliage wall
that receive no spray.
Summary of Contents for GSG-AN-VM
Page 72: ...Design mail bauer ib com...