Lipco GSG-AN-VM, Translation Of Original Instructions, Page: 16 / 72

Operating instruction Saddle-mount fan unit with tank trailer GSG-AN-VM
16 - 72 011170-05-EN BA GSG-AN-VM / 2019-01-16
12. Components of GSG-AN-VM
12.1. Filters
Suction filter
– 50 mesh:
•
Suction filter is located bet-
ween spray liquid tank and
pump.
Suction filter
•
The filter insert should be
checked several times daily for
dirt and cleaned, if necessary.
Fig. 1
Pressure filter
– mesh width 80 mesh:
•
The pressure filter is located
between the shutoff motors.
•
The quick cleaning unit in low-
er end of the pressure filter is
connected to hydro injector in
tank and permanently pressur-
ized.
Drain valve has to be perma-
nently open.
Fig. 2
•
This circuit guarantees an extended cleaning cycle.
•
More pressure filters are integrated in the spaying nozzles.
•
These nozzles filters should be checked by the end of the spay-
ing procedure and cleaned if necessary.