Linhai ARCHON 400, Service Manual

Page: 38 / 218

CHAPTER 3 ENGINE
BUCK 450 SERVICE MANUAL 20.0
3.2.5 COOLANT LEVEL INSPECTION
Inspect:

Coolant level
Coolant level should be between the
maximum
A
○
a
E
A
and minimum
A
○
b
E
A
marks.
Coolant level is below the "LOWER" level line
Add soft water (tap water) up to the proper level.
CAUTION:
Hard water or salt water is harmful to engine
parts. Use only distilled water if soft water is not
available. If you use tap water, make sure it is
soft water.
1. Start the engine and let it warm up for several
minutes.
2. Turn off the engine and inspect the coolant
level again.
NOTE:
Wait a few minutes until the coolant settles
before inspecting the coolant level.
COOLANTRE PLACE MENT
1. Remove:

Front cover of UTV plastic body work.

Seat.
2. Remove:

Hose

(reservoir tank)
Drain the reservoir tank of its coolant.
3. Remove:

Drain bolt


Radiator cap
WARNING:
Do not remove the radiator cap when the
engine and radiator are hot. Scalding hot
fluid and steam may be blown out under
pressure, which could cause serious injury.
When the engine has cooled, open the
radiator cap as follows:
Place a thick rag or a towel over the radiator
cap. Slowly rotate the cap counterclockwise
toward the detent. This allows any residual
pressure to escape. When the hissing sound
has stopped, press down on the cap while
turning counterclockwise and remove it.
CHAPTER 3 ENGINE PAGE. 3- 13