Redman and Associates BKTRLR-SAMS-1 Owner'S Assembly And Safety Manual Download

Page: 1 / 23

OWNER’S ASSEMBLY AND

SAFETY MANUAL

●

User instructions

●

Trailer component diagram

●

Assembly and disassembly of the frame & seat

●

Attaching and removing the top cover

●

Securing and removing children & belongings

●

Attaching and removing the wheels

●

Attaching the reflectors

●

Inserting and removing the flag

●

Extending and folding the hitch arm

●

Attaching and removing the trailer to/from rear axle

●

Attaching and removing the jogger/stroller conversion kit

●

Using the braking system

●

Disassembly, folding and storage

●

Maintenance and service

CAUTION!!!

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USE.

FAILURE TO DO SO MAY RESULT IN DAMAGE TO THIS

PRODUCT OR SERIOUS INJURY OR DEATH TO THE USER

AND RIDERS.

Summary of Contents for BKTRLR-SAMS-1
























Search results

Summary of Contents for BKTRLR-SAMS-1

Reviews:

Related manuals for BKTRLR-SAMS-1

Brands by name

Popular brands

Redman and Associates BKTRLR-SAMS-1, Owner'S Assembly And Safety Manual

Search results

Summary of Contents for BKTRLR-SAMS-1

Reviews:

Related manuals for BKTRLR-SAMS-1

Brands by name

Popular brands