Linhai ARCHON 400, Service Manual

Page: 209 / 218

CHAPTER 8 ELECTRICAL
BUCK 450 SERVICE MANUAL 20.0
CHAPTER 8 ELECTRICAL PAGE 8- 25
Front/rear turn left light(LED)
Tester (+) lead →Orange lead
Tester negative (-) lead →Green lead
Check for voltage (12V) on the lead at
bulb socket connectors
This circuit is not faulty
Replace the bulb.
If the light is LED,replace the light directly
2. the taillight fails to come on
1. Bulb and bulb socket
CHECK
CONTINUITY
NO CONTINUITY
Replace the bulb and /or bulb
socket
2. Voltage
Connect the pocket tester (DC20V) to
the taillight couplers.
2.1 position light
Tester (+) lead→ Black terminal
Tester (-) lead→ Green terminal
Turn the main switch to on.
Check the voltage (12V) on the taillight
couplers
2.2 brake light
Tester (+) lead→
Green/Yellow
terminal
Tester (-) lead→ Green terminal
Turn the main switch to on.
Step on brake.
Check the voltage (12V) on the taillight
couplers
CONTINUITY
This circuit is not faulty.
Replace the light.
OUT OF SPECIFICATION
The wiring circuit from main
switch to taillight connector is
faulty. Repair.