Linhai ARCHON 400, Service Manual

Page: 70 / 218

CHAPTER 3 ENGINE
BUCK 450 SERVICE MANUAL 20.0
CAUTION:
Use the spacer

(30mm, thickness: 2-3mm).
6. Install:

V-belt


Clutch assembly

NOTE:
Install the V-bet with clutch assembly to the
primary sheave side.
CAUTION:
Never smear grease to the V-belt, secondary
sheave and clutch.
7. Install:

Nut

(clutch carrier)
NOTE:
Tighten the nut (clutch carrier), using the locknut
wrench

while holding the clutch carrier with
the rotor holder

8. Install:

Clutch housing


Nut (clutch housing)

NOTE:
Tighten the nut (clutch housing),using the
sheave holder

).
9. Set:

V- belt
NOTE:
Move the V-belt to minimum diameter of the
primary sheave

, maximum diameter of the
secondary sheave

and make the V-belt tense.
CHAPTER 3 ENGINE PAGE. 3- 45