Linhai ARCHON 400, Service Manual

Page: 37 / 218

CHAPTER 3 ENGINE
BUCK 450 SERVICE MANUAL 20.0

O-ring

Drain the crankcase of its oil.
4. Install:

O-ring

NEW

Compression spring


Oil strainer


Drain plug


Oil filer plug
NOTE :
Check the drain plug O-ring. If damaged,
replace it with a new one.
5. Fill:

Crankcase
Oil quantity:
1.4L
6. Check:

Engine oil level
Refer to "ENGINE OIL LEVEL INSPECTION"
section
ENGINE OIL PRESSURE INSPECTION
Inspection steps:

Slightly loosen the oil check bolt


Start the engine and keep it idling until the oil
begins to seep from the oil check bolt. If no oil
comes out after one minute, turn the engine off
so it will not seize.

Check oil passages and oil pump for dam age
or leakage.

Start the engine after solving the problem (s),
and recheck the oil pressure.

Tighten the oil check bolt to specification.
CAUTION:

Start the engine and check the oil pressure
with the oil check bolt loosened.

Do not apply at high speeds more than
specified when checking the pressure.
NOTE:
Wipe any spilled oil off the engine.
CHAPTER 3 ENGINE PAGE. 3- 12