Linhai ARCHON 400, Service Manual

Page: 86 / 218

CHAPTER 3 ENGINE
BUCK 450 SERVICE MANUAL 20.0
3. Inspect:

Mechanical sea , slip ring side

Inspect the slip ring side of the mechanical seal
and the impeller

for level installation.
Incorrect level
→
Reinstall.
4. Install:

Impeller shaft


Circ lip

NEW
Installation steps:

Apply a small amount of grease to the impeller
shaft tip.

Install the impeller shaft while turning it. Use
care so that the oil seal is not damaged or the
spring does not slip off its position.
NOTE:
After installing the impeller shaft, check it for
smooth rotation.
5.Install:

O-ring

NEW
6. Install:

Water pump housing

Housing cover
7. Install:

Shaft

Align the slot on the impeller shaft with the
projection on the shaft when installing.
CHAPTER 3 ENGINE PAGE. 3- 61