8 Maintenance
SKF products are low-maintenance. However, to ensure that they
function properly and to avoid risks right from the startup, all joints
and connections should be checked to make sure that they are pro-
perly fitted.
If necessary, you can clean the pump using gentle, material-ap-
propriate cleaning agents (no alkali, no soap). For safety reasons, the
pump must be disconnected from electric supply before cleaning.
During cleaning, it is important to make sure that no cleaning
agent enters the inside of the pump.
If the system is operated normally with intercompatible lubricants,
the inside of the product does not need to be cleaned.
If you accidentally fill the pump with an incorrect or contaminated
lubricant, the inside of the product does have to be cleaned. If this
occurs, contact SKF Services for more information on cleaning
procedures.
SKF is not liable for damage caused by improper installation, main-
tenance, or repair work.
WARNING
The described product may be under pressure when it is
being operated. The product must therefore be depressu-
rized before starting installation, maintenance, or repair
work and before making any changes to the system.
WARNING
Working on products that have not been disconnected from
the power supply can cause serious injury or death to per-
sons. Installation, maintenance, and repair work may only
be carried out by qualified experts on a product that is not
connected to a power supply. The supply voltage must be
turned off before any product components are opened.
NOTE
You must not dismantle the product or parts of the product during
the warranty period. Doing so invalidates all warranty claims.
All other work relating to installation, maintenance, and repair
must only be carried out by SKF Service.
Only original SKF spare parts may be used. It is prohibited for
the operator to make alterations to the product or to use non ori-
ginal spare parts and resources.
31
Summary of Contents for SKF CLK
Page 37: ...37 ...
