Lincoln SKF CLK, Installation And Operation Manual

Page: 30 / 38

7.5. Commissioning
Before activation, check all electrical and hydraulic connections.
Once the CLK lubrication system is on, the lubrication process
starts according to user configuration.
The user can follow the progress of the lubrication process at any
time by reading the messages displayed on the central unit
(† Table 7) .
Display, menu 1
Screen Description
• The lubrication system is operating in cyclic mode. Lubrication phase is in progress.
– 0357 = number of axes lubricated
– 3000 = number of axes to be lubricated
– 000h08 = time elapsed since the beginning of the lubrication cycle
• The lubrication system is operating in cyclic mode. Pause phase is in progress.
– 000h00 = pause time elapsed
– 000h30 = pause time remaining
• The lubrication system is operating in semi-automatic mode. Lubrication phase is in
progress.
– 0003 = number of axes lubricated
– 3000 = number of axes to be lubricated
• The lubrication system is operating in semi-automatic mode. Lubrication phase is
completed.
– 000h35 = time elapsed since the lubrication of the first axis
• The lubrication system is operating in continuous mode. Lubrication phase is in progress.
– 0006 = number of axes lubricated
– 3000 = number of axes to be lubricated (loop counting)
1
0 3 5 7 / 3 0 0 0 0 0 0 h 0 8
L U B R I C A T I O N
1
0 0 0 h 0 0 / 0 0 0 h 3 0
P A U S E
1
0 0 0 3 / 3 0 0 0
S E M I - A U T O O N
1
S I N C E 0 0 0 h 3 5
S E M I - A U T O O F F
1
0 0 0 6 / 3 0 0 0
C O N T I N U O U S O N
30