UMX-TPS-TX100 series
User’s Manual
Section 7. LW2 Prog
rammer’s reference
Page 69 / 127
7.3.6. View connection state on the output
Description:
Viewing the
output’s connection results in different response length, because
it depends on the device. The response below refers to an UMX-TPS-TX140.
Format
Example
Command {VC
●<layer>}
→ {vc av}
Response (ALL<layer>
●<in
2
>)CrLf
←
←
(ALLV 02)CrLf
(ALLA 01)CrLf
Legend:
<layer>:
<layer>
Layer
A
Audio layer
V
Video layer
AV*
Audio & Video layer
* AV is not used in the response. When AV is typed in the commands, the response will
result two lines, one for the Video and one for the Audio states.
Explanation
: Video input port 2 and audio input port 1 are switched to the TPS output.
Info: If an output is locked, muted, or both locked and muted, the response format changes. If
outputs are muted you get a letter 'M', if locked a letter 'L' and if muted and locked at the
same time 'U' before the 2 digit numbers.
7.3.7. View crosspoint size
Description:
Shows the physical crosspoint size.
Format
Example
Command {getsize
●<layer>}
→ {getsize av}
Response (SIZE=<size>
●<layer>)CrLf ←
←
(SIZE=6x1 V)CrLf
(SIZE=5x1 A)CrLf
Legend:
<size>:
<number of inputs>x<number of outputs>
<layer>:
Explanation:
The device reports that it has a video crosspoint with 6 inputs and 1 output,
and an audio crosspoint with 5 inputs and 1 output.
7.3.8. Query video Autoselect mode
Description:
The autoselect mode of video output can be queried.
Format
Example
Command {AS_V<out>=?}
→ {as_v1=?}
Response (AS_V<out>=<state>;
<mode>;<no_signal>)CrLf
← (AS_V1=E;K;B)CrLf
Legend:
<out>:
The output port number (1). See more details about port
on page
<state>:
E = Autoselect is enabled; D = Autoselect is disabled
<mode>:
P = Priority detect; K = First detect; L = Last detect
<no_signal>:
B = Blank screen; M = Mute output
Explanation:
The device reports that the Autoselect mode is enabled in first detect mode,
and if there is no incoming signal at all, the crosspoint is not changed (blank screen).
For more information about the autoselect modes see the section
on page
Summary of Contents for UMX-TPS-TX120
Page 2: ......
