UMX-TPS-TX100 series
User’s Manual
Section 8.
LW3 Programmers’ reference
Page 103 / 127
8.11. EDID management
8.11.1. Query the emulated EDIDs
Command format:
GET
●/EDID.EdidStatus
Response format:
pr
●/EDID.EdidStatus([*\{<edid_id>":"<emulated_edid_id>";"\}])
Example:
> GET●/EDID.EdidStatus
< pr●/EDID.EdidStatus=F48:E1;F48:E2;F48:E3;F48:E4;F48:E5
Explanation:
The available video input ports are listed from E1 to E5 and the emulated
EDID’s number is displayed. E.g. F48 (48
th
Factory) EDID is emulated on E1
(VGA) input.
8.11.2. Query the validity of a dynamic EDID
Command format:
GET
●/EDID/D/D1.Validity
Response format:
pr
●/EDID/D/D1.Validity={true|false}
Example:
> GET●/EDID/D/D1.Validity
< pr●/EDID/D/D1.Validity=true
Explanation:
The ‘Validity’ property is true, valid EDID is stored in D1 memory place.
8.11.3. Query a user EDID header
Command format:
GET
●/EDID/U/U1.Header
Response format:
pr●/EDID/U/U1.Header={“Invalid”|<edid_header>}
Legend:
<edid_header>:
ID of manufacturer; preferred timing; monitor name
Example1:
> GET●/EDID/U/U1.Header
< pr●/EDID/U/U1.Header=Invalid
Explanation1:
The memory place U1 does not contain valid EDID.
Example2:
> GET●/EDID/U/U2.Header
< pr●/EDID/U/U2.Header=LWR;[email protected];D640x480p60
Explanation2:
The memory place U2 contains valid EDID.
8.11.4. Emulating an EDID to an input port
Command format:
CALL
●
/EDID:switch(<source>:<destination>)
Response format:
mO●/EDID:switch
Example:
> CALL●/EDID:switch(F49:E2)
< mO●/EDID:switch
Legend:
<source>:
Source EDID memory places that can be Factory, User or
Dynamic EDID memory.
<destination>: The emulated EDID memory of the desired input port.
Summary of Contents for UMX-TPS-TX120
Page 2: ......
