Take out the
2x Multi Colour Strip Lights
and using it’s adhesive backing, stick one to each of the LEGO spot lights (on the flat side of the 2×6
plate). Ensure that the port on one of the strip lights is facing the right side for one of the spot lights, and the port on the other strip light is facing the
left side for the other spot light (upside down).
40.)
Take a new
30cm Connecting Cable
and connect it to the strip light with the the port facing the right. This will be your left spot light. Connect
the other end of the cable to a spare port on the 6-port expansion board on the bottom of the right section.
Disconnect the piano and the white bust, then lay the cable behind, in between studs before reconnecting them over the top. Secure the cable running
down the right side of the fire place to the wall using tape. Tuck the 6-port expansion board behind the white bust, then run the left spot light out
toward the front left section of the building as shown below: