55.)
Disconnect the bit lights from the expansion board, then take the two left cables and thread them up the space in between plates as shown
below.Pull the two cables all the way out from the top side, then thread them back down the next space in between plates. Pull the two cables all
the way out from below.
Twist and wind all five cables around each other all the way to the ends so they all come together to form one large cable.
56.)
Reconnect the arrow sign to the set, then thread the cable behind and through the left side over the mirror. Pull the cable out from the other side
andreconnect the five lights to the 12 port expansion board. Secure the bit light cables as well as connecting cable to the yellow beam using tape.
