Take a
Flicker Effects Board
and connect a
5cm Connecting Cable
to the
IN
port. Connect the other end of the cable to the 12-port expansion board.
6.)
Take the other of the last 30cm Connecting Cable connected to the 12-port expansion board and thread it through the left side of the entrance
space. Pull it out from the other side and pull it all the way up behind the left “boxing glove”. Secure the cable underneath the bottom of the
“Joker” sign by looping it around the frame a few times. Reconnect the left light section of the entrance using the clip on top as shown below:
