Thread the cable through over the technic pieces (grey gears) on the left side as shown below. Pull the cable down all the way out over the left side
behind the first yellow mirror.
Take caution when threading the cable over the technic gears. Ensure the cable is laid out of the way of the gear teeth as we don’t want
the cable getting caught when we operate the boxing gloves function.
Connect the 30cm Connecting Cable to the 8-port Expansion Board nearby, then tuck the expansion board behind the mirror to the left.
Turn your USB Power Bank ON to test all the lights at the front entrance are working OK.
Note: If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the
expansion board to verify where the fault lies (with the light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues on our
online troubleshooting guide.
13.)
We will now light up the cherry bombs on either side of the front entrance. First take the left bomb and disassemble the top spark pieces as
shown below:
