Reconnect the top left wall section over the two cables ensuring they are also laid in between studs underneath before connecting the Bit Light cable to
the 6-Port Expansion Board. Turn ON the USB Power Bank to test the Bit Light is working OK.
Note: If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the
expansion board to verify where the fault lies (with the strip light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues on our
online troubleshooting guide.
Neaten up excess cable by folding and twisting the Bit Light cable around itself a few times, then neatly place the bunched up cables and expansion
board in the corner behind the boxes.
