45.)
Connect the other end of the 15cm connecting cable we brought up from the second floor to the left port on a new
White Strip Light.
Take a new
15cm Connecting Cable
and connect it the strip light’s right port.
Using your LEGO Removal tool, create a gap underneath the brown plate above the third floor (swimming pool) to allow you to slightly lift up the
front side of the attic section.
Bring the strip light over the left wall and lay the cable in between studs. Using it’s adhesive backing, stick the strip light underneath the brown plate
above the pool as shown below. Bring the right cable over the right wall in between studs before reconnecting the top section closing up all gaps.
Eliminate excess cable from the left strip light by looping the cable and tucking it in underneath the brown ceiling plate.
