MobilGate - 128c
Gate and barrier control GSM module with
2 inputs and 2 outputs for 128 phone numbers
MobilGate-128c
is an industrial GSM module developed for remotely controlling doors, garage
doors and barriers with 2 opto-isolated inputs and 4 high current relay outputs. The 2 relay outputs
allow the configuration of 128 phone numbers to control the gates remotely with a free call based on
caller ID recognition. The 2 relay outputs can be triggered by SMS orders received from previously
configured phone numbers. Relays operated with a free call can be triggered for pre-determined
duration, and the relays operated with SMSs can be turned on and off permanently. The recognition
of maximum 128 phone numbers allows to set up entitlements for 128 users. The general inputs can
be used arbitrarily for transmitting gate error signals, burglary alarm center's signals or panic signals.
Users are informed about input changes via
SMS with pre-configured content. Certain
electronic devices, such as heaters, air
conditioners, light devices etc. can be
turned on and off with relay outputs
operated via SMSs, thus the function of
gate opener can be broadened with many
supplements. Its power voltage is 10-30V,
which can be supplied by a power adapter.
Its setup can be configured with our free
downloader software via USB port, or by
sending several different configuration SMS
remotely. Each input and output can be
labeled with a max. 16-character long name.
The configuration of the SMS relay output commands which trigger the relays to be on or off also
can be set. The module also has a 4-character passcode in order to prevent any unauthorized
personnel to disable or reconfigure the module. The GSM gate opener has internal timers, thus the
output relays are triggered for a configured time when calls occur, which can be maximum of 9999
seconds (about 3 hours). After the given time expires, the relays turn off automatically and return to
their original state.
1. Operation of MobilGate-128c
The GSM gate opener is equipped with a carrier-independent industrial GSM module; thus it
is ready for SMS-based communication with a prepaid or subscription SIM card without PIN code.
The data which is necessary for operation, for instance SMS number of the service provider, users’
numbers, output and input names etc. can be configured by downloading them into the device or
sending an SMS with a certain content. In the case there is any change of the inputs, the module
name, module number, the appropriate input name and status are also sent via SMS. The detailed
messages provide possibility to be able to easily identify the appropriate device in case of having
more than one. Input and output status with every parameter can be queried by sending a
corresponding SMS. Configuration SMSs are confirmed after reception, and an incorrect
configuration SMS will result in an error message. The module does not discard the previously set
configuration, including input names, output status, phone numbers, etc. after turning the device off.
After power-up, although timer parameters are deleted, but the module continues its operation where
SeaSoft Ltd.
www.seasoft.hu - www.mobil-control.eu T: (+36) 62 406405 M: (+36) 30 2557688 F: (+36) 62 405-969
