Lifescan SureStepFlexx, Operator'S Manual

Page: 56 / 117

44
SureStepFlexx Meter Operator’s Guide
during transfer, the following message appears after
the status screen:
Last Data Transfer mm/dd/yy
hh:mm Failed. To verify the upload was successful,
check the status screen for the date and time of the
last upload.
Entering a Receiving Modem Phone Number
If the modem phone number was not entered at the
workstation and downloaded to the meter, you may
enter it at the meter.
During a data transfer session, the Enter Phone #
screen appears.
■ NOTE:
You may also access this screen by selecting
Enter Phone Number from the Setup Menu.
1 Enter the receiving modem
phone number.
Once a phone number is
entered, it remains in the
meter’s memory. You will not
be prompted to enter it again.
If you need to change the
phone number, access the
Enter Phone # screen from the Setup Menu.
Press WAIT to place a comma (representing a pause)
in the number. For example, if the phone number
includes a 9 to access an outside line, press
WAIT
after the 9.
2 Press .
1
2 3
4 5 6
7 8 9
0
C L R
DEL
E n t e r P h o n e #
WAIT
Stealth.book Page 44 Monday, October 28, 2002 11:20 PM