Lifescan SureStepFlexx, Operator'S Manual

Page: 54 / 117

42
SureStepFlexx Meter Operator’s Guide
A series of messages appears on
the screen indicating the
status of the transfer.
When the transfer is complete,
the meter beeps and a message
appears.
■ NOTE:
If the Main Menu appears instead of the
message “Data Transfer Complete,” check the meter’s
battery bar on the status screen. The power may be
too low to perform a data transfer. If necessary,
replace the meter’s batteries. Retry transferring data.
2 Remove the meter from the cradle and press
Cont if the meter is on.
The meter automatically turns off after
approximately 2 minutes. To see if the transfer was
successful, turn on the meter. If an error occurred
during the transfer, the following message appears
after the status screen:
Last Data Transfer mm/dd/yy
hh:mm Failed. To verify the upload was successful,
check the status screen for the date and time of the
last upload.
Stealth.book Page 42 Monday, October 28, 2002 11:20 PM