37
Models:
95R Recumbent Lifecycle® Exercise Bikes Elevation Inspire &
95R Upright Lifecycle® Exercise Bikes Elevation Discover SI
Tools Required:
Phillips Screwdriver, Metric Allen Set, M16 & M17 Wrench
Parts Not Used From Kit:
(1) Lower Mounting Bracket
For 95R Elevation Inspire Units Only:
a.
Remove the protective liner from one of the provided
fastener strips. Attach the fastener strip to the
bottom of the POWER BLOCK (1). Interlock the
remaining fastener strip to the installed fastener strip.
Remove the remaining protective liner from
fastener strip and secure the power block to the
underside of the center frame as shown.
Connect the SCREW-TYPE CONNECTOR of the
POWER CORD (2) to the underside receptacle.
Bundle excess power cord and store under the
unit. Connect the COAXIAL CABLE (3) to
the broadcast supply receptacle in similar fashion.
b.
Connect the POWER CORD to the POWER BLOCK (1).
1.
Attach the TV BRACKET
(with bent tab)
(4) to the MAIN BRACKET (5) as
shown using four SCREWS (6) and WASHERS (7). Tighten the screws
securely. (8-10 ft. lbs.)
2.
Remove the four SCREWS (8) securing the REAR CONSOLE COVER (9) to
the frame. Remove the rear console cover.
Remove the four SCREWS (10) securing the insert (11) as shown. Set the
rear console cover aside.
Remove the CONSOLE (13).
1
2
3
4
7
6
5
8
9
10
11
13
