41
Model:
CLSR (Integrity Series)
Tools Required:
Standard Screwdriver, Phillips Screwdriver, Metric Hex Key Set, Side Cutters
Note: The following Assembly Instructions show the console attached prior to ATTACHABLE TV installation. Follow
all appropriate steps when the console is not mounted.
1.
Remove the square END CAP (a) and two PLASTIC PLUGS
(b) located behind the console on the MAIN CONSOLE
SUPPORT TUBE (c).
2.
Remove the four SCREWS (d) that are used to fasten the
console. Carefully set the console aside, securing it so that it
does not fall.
3.
Locate the TV MOUNTING BRACKET (e). Unwrap the POWER
SUPPLY CORD (cc) and COAXIAL CABLE (dd) located within
the CONSOLE SUPPORT BRACKET TUBE (c). Route these
cables through the opening of the TV MOUNTING BRACKET (e).
Locate the AUDIO / VIDEO / I-R REMOTE CONTROL
CABLE ASSEMBLY (f). Route this cable assembly through the
TV MOUNTING BRACKET(e) with the 2 -connector end coming
out of the opening of the TV MOUNTING BRACKET.
4.
Insert the TV MOUNTING BRACKET into the CONSOLE
SUPPORT TUBE and fasten with three SCREWS (h) and three
WASHERS (i).
CAUTION:
Do not pinch any cables when inserting the TV MOUNTING BRACKET into the CONSOLE SUPPORT TUBE.
5.
Assemble the HINGED BRACKET (j) to the TV MOUNTING BRACKET with the following provided hardware:
k.
screw
l.
steel washer
m.
nylon plastic washer
n.
nylon plastic shoulder washer
o.
steel washer
p.
nut
a
b
d
c
h
i
j
p
o
k
l
m
n
g
f
f
dd
cc
e
