Life Fitness M051-00K96-0002 Assembly Instructions Manual Download Page 52

Page: 52 / 52

Connect the COAXIAL CABLE, POWER CORD and I-R REMOTE CONTROL CABLE (b) to the rear of the

ATTACHABLE TV (h). See the

Media Connections

page in this manual for detailed information.

CABLE TIE (c) any excess cable together behind the ATTACHABLE TV (h) and position the cables between the

MOUNTING BRACKET (E) and the DISPLAY CONSOLE (9).

Secure the POWER ADAPTER (n) to the FRONT STABILIZER (o) using two CABLE TIES (c) as shown. Be sure the

cable ties are pulled tight and trim the excess cable ties. Connect the screw-type connector of the POWER CORD

(p) to the underside receptacle. Bundle excess power cord and store under the unit. Connect the coaxial cable (q) to

the broadcast supply cable in similar fashion.

10. Connect the POWER SUPPLY CORD to the POWER ADAPTER (n).

11.

Continue with the remainder of assembly as instructed in the 9

5Si

Assembly Instructions or 93S, 90S Assembly Instructions.

Plug the power supply cord into an electrical outlet upon

completion.

Summary of Contents for M051-00K96-0002





















































Search results

Summary of Contents for M051-00K96-0002

Reviews:

Related manuals for M051-00K96-0002

Brands by name

Popular brands

Life Fitness M051-00K96-0002, Assembly Instructions Manual

Search results

Summary of Contents for M051-00K96-0002

Reviews:

Related manuals for M051-00K96-0002

Brands by name

Popular brands