48
Model:
CLSS (Integrity Series)
Tools Required:
Standard Screwdriver, Phillips Screwdriver, Torx Head Screwdriver, Side Cutters, Hex Head Wrench
Note: The following Assembly Instructions show the CONSOLE attached prior to ATTACHABLE TV installation.
Follow all appropriate steps when the console is not mounted.
1.
Remove the square END CAP (a) and two PLASTIC PLUGS (b) located
behind the console on the MAIN CONSOLE SUPPORT TUBE (c).
2.
Remove the four SCREWS (d) that are used to fasten the console. Carefully
set the console aside, securing it so that it does not fall.
3.
Locate the TV MOUNTING BRACKET (e). Unwrap the POWER SUPPLY
CORD (cc) and COAXIAL CABLE (dd) located within the CONSOLE
SUPPORT BRACKET TUBE (c). Route these cables through the opening of
the TV MOUNTING BRACKET (e).
Locate the AUDIO / VIDEO / I-R REMOTE CONTROL CABLE ASSEMBLY
(f).
Route this cable assembly through the TV MOUNTING BRACKET (e)
with the 2-connector end coming out of the opening of the TV MOUNT-
ING BRACKET.
4.
Insert the TV MOUNTING BRACKET into the CONSOLE SUPPORT TUBE
and
fasten with three SCREWS (h) and three WASHERS (i).
CAUTION:
Do not pinch any cables when inserting the TV MOUNTING BRACKET into the CONSOLE SUPPORT TUBE.
5.
Assemble the HINGED BRACKET (j) to the TV MOUNTING BRACKET with the following provided hardware:
k.
screw
l.
steel washer
m.
nylon plastic washer
n.
nylon plastic shoulder washer
o.
steel washer
p.
nut
a
b
d
c
f
e
cc
f
dd
g
j
p
o
n
m
l
k
h
i
