Libelium waspmote plug & sense Technical Manual Download

Page: 70 / 162

-70-

v5.8

Batteries

18. Batteries

Libelium provides two different battery option for Waspmote Plug & Sense!

•

Rechargeable 6600mAh

•

Non rechargeable 26Ah

Waspmote has a control and safety circuit which makes sure the battery charge current is always adequate. The following

images show battery discharging for a typical load and for a specific case.

Figure : Typical discharging curve for battery

Figure : Typical discharging curve for 26Ah battery with a 20 Ohm load

Note:

As shown above, the discharging curve for 26Ah battery is always plain, due to its technology. This means there is no way

to know what is the percentage of remaining charge in a non-rechargeable battery.

Note:

The ON / OFF button can now be in ON or OFF position to charge the battery. Obviously, non-rechargeable batteries cannot

be recharged with any method.

Summary of Contents for waspmote plug & sense



































































































































































Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands

Libelium waspmote plug & sense, Technical Manual

Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands