Libelium waspmote plug & sense Technical Manual Download

Page: 118 / 162

-118-

v5.8

Interacting with Waspmote Plug & Sense!

Figure : HyperTerminal application capturing Waspmote’s output.

25.1.4. Mac-OS receiver

If MAC OS X is used (version later than 10.3.9) the application ‘ZTERM’ can be used to capture the serial port output. This

application can be downloaded from:

http://www.dalverson.com/zterm/

This application is configured automatically, establishing the USB on which Waspmote has been connected and the speed.

The following image shows this application capturing Waspmote’s output, while the example code ‘Waspmote Accelerator Basic

Example’ is run.

Figure : Waspmote’s output capture

Summary of Contents for waspmote plug & sense



































































































































































Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands

Libelium waspmote plug & sense, Technical Manual

Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands