-67-
v5.8
Sensor protection
Step 3: Placing sensors inside
Sensor probed must be inside the solar shield cavity. Depending on the solar shield, the number of sensor probes that can be
introduced vary. It is only necessary to introduce the sensor part of the sensor probe, not the connector.
Figure : Placing sensors inside the solar shield
Remember to fix the sensor probes using cable ties (or similar) to avoid sensors can move and come out from the solar shield.
Step 4: Closing the solar shield
Once the sensors are inside the solar shield, close the solar shield screwing the necessary parts (see documentation included
with the solar shield for more details).
Figure : Closing the solar shield
