Libelium waspmote plug & sense Technical Manual Download

Page: 102 / 162

-102-

v5.8

Uploading code

Step 8: Select the USB port

Select the corresponding serial port by going to tools/serial port. If you are unable to see the proper USB port maybe you should

install the latest FTDI drivers.

Figure : Selecting the USB port for Waspmote Plug & Sense!

Note:

the name of the USB ports depends on the OS and the particular PC you have. The best way to find the USB where Waspmote is

connected is trial & error.

Step 9: Compile the code

Compile the code (the IDE has a button for that), and check there are no errors or warnings. The IDE should say “Done Compiling”.

Figure : Compiling a code for Waspmote Plug & Sense!

Summary of Contents for waspmote plug & sense



































































































































































Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands

Libelium waspmote plug & sense, Technical Manual

Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands