Libelium waspmote plug & sense Technical Manual Download

Page: 43 / 162

-43-

v5.8

Radios

7.10. GPRS

Waspmote can integrate a GSM (Global System for Mobile communications) / GPRS (General Packet Radio Service) module to

enable communication using the mobile telephone network.

•

Model:

SIM900 (SIMCom)

•

Quadband:

850MHz/900MHz/1800MHz/1900MHz

•

TX Power:

2W(Class 4) 850MHz/900MHz, 1W(Class 1) 1800MHz/1900MHz

•

Sensitivity:

-109dBm

This module can carry out the following tasks:

•

Making/Receiving calls

•

Making ‘x’ tone missed calls

•

Sending/Receiving SMS

•

Single connection and multiple connections TCP/IP and UDP/IP clients

•

TCP/IP server.

•

HTTP Service

•

FTP Service (downloading and uploading files)

Note:

The SIM card can be installed by the user thanks to the External SIM socket, keeping the warranty valid.

All information about their programming and operation can be found in the

GSM/GPRS Networking Guide

available at

Development section

of Libelium website.

Summary of Contents for waspmote plug & sense



































































































































































Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands

Libelium waspmote plug & sense, Technical Manual

Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands