Libelium waspmote plug & sense Technical Manual Download

Page: 119 / 162

-119-

v5.8

Interacting with Waspmote Plug & Sense!

25.2. Meshlium

Figure : Meshlium Gateway

Meshlium

is a Linux router which works as the Gateway of the Waspmote sensor network. It can contain different radio

interfaces: WiFi 2.4GHz, WiFi 5GHz,

3G/GPRS

, Bluetooth and

XBee/LoRa

. As well as this, Meshlium can also integrate a GPS

module for mobile and vehicular applications and be solar and battery powered. These features along with an

aluminium IP-65

enclosure

allows Meshlium to be placed anywhere

outdoor

. Meshlium comes with the Manager System, a web application

which allows to control quickly and easily the WiFi, XBee, LoRa, Bluetooth and 3G/GPRS configurations a long with the storage

options of the sensor data received.

The new Meshlium Xtreme allow you to even detect iPhone and Android devices and in general any device which works with

WiFi or Bluetooth interfaces. The idea is to be able to measure the amount of people and cars which are present in a certain

point at a specific time, allowing the study of the evolution of the traffic congestion of pedestrians and vehicles.

More info:

http://www.libelium.com/meshlium

25.2.1. What can I do with Meshlium?

•

Connect your wireless network to Internet through Ethernet, WiFi and 3G/GPRS

•

Store the sensor data in a local or external data base in just one click!

•

Create a WiFi Mesh Network in just two steps!

•

Set a WiFi Access point in 1 minute

•

Discover Bluetooth users and store their routes

•

Trace the GPS location and store it in a local or external database in real time

Summary of Contents for waspmote plug & sense



































































































































































Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands

Libelium waspmote plug & sense, Technical Manual

Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands