Libelium waspmote plug & sense Technical Manual Download

Page: 114 / 162

-114-

v5.8

Interacting with Waspmote Plug & Sense!

25. Interacting with Waspmote Plug & Sense!

25.1. Receiving XBee frames with Waspmote Gateway

25.1.1. Waspmote Gateway

This device allows the collection of data which flows through the sensor network into a

or device with a standard USB port.

Waspmote Gateway will act as a

”data bridge or access point”

between the sensor network and the receiving equipment.

This receiving equipment will be responsible for storing and using the data received depending on the specific needs of the

application.

Figure : Waspmote Gateway

The receiving equipment can be a PC with Linux, Windows or Mac-OS, or any device compatible with standard USB connectivity.

The Gateway offers a “plug”

USB A

connector, so the receiving device has to have a “receptacle“ USB A connector.

Once the Gateway is correctly installed, a new communication serial port connecting directly to the XBee module’s UART

appears in the receiving equipment, which allows the XBee to communicate directly with the device, being able to both receive

data packets from the sensor network as well as modify and/or consult the XBee’s configuration parameters.

Another important function worth pointing out is the possibility of

updating or changing the XBee module’s firmware

Figure : Waspmote Gateway connected in a PC

Summary of Contents for waspmote plug & sense



































































































































































Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands

Libelium waspmote plug & sense, Technical Manual

Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands