Libelium waspmote plug & sense Technical Manual Download Page 98

Page: 98 / 162

-98-

v5.8

Uploading code

22. Uploading code

Using the USB connector, a new code can be uploaded to Waspmote without opening Waspmote Plug & Sense!. Just connect

one side of the USB cable to this connector, removing protection cap if necessary and connect the other side to a PC. Remember

that Waspmote must be ON to allow uploading a new code. Next steps describe this process in detail.

Step 1: Open the USB connector

Remove the protection cap of the USB connector.

Figure : Removing the USB cap

* In the case you have a Plug & Sense! with GPRS or 3G modules, insert your micro-SIM card in the External SIM socket with care.

Figure : Inserting a SIM card with care in the External SIM socket

Summary of Contents for waspmote plug & sense



































































































































































Search results

Summary of Contents for waspmote plug & sense

Reviews:

Libelium waspmote plug & sense, Technical Manual, Page: 98 / 162

Search results

Summary of Contents for waspmote plug & sense

Reviews: