Libelium waspmote plug & sense Technical Manual Download

Page: 66 / 162

-66-

v5.8

Sensor protection

Solar shield installation steps

The installation of this element is quite simple. Follow the next steps to ensure your installation is done correctly.

Note:

The usage of a solar shield requires that each sensor probe should be used with an extension cord. Otherwise the sensor probe

will be too short to be connected to the solar shield and the enclosure at the same time.

Step 1:

Connecting probes to extension cords

Sensor probes should be used in combination with extension cords.

Figure : Connecting probes to extension cords

Step 2: Opening the solar shield

The solar shield needs to be opened to allow placing sensors inside. Remove the necessary screws and the first plastic plate (see

documentation included with the solar shield for more details).

Figure : Opening the solar shield

Summary of Contents for waspmote plug & sense



































































































































































Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands

Libelium waspmote plug & sense, Technical Manual

Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands