Libelium waspmote plug & sense Technical Manual Download

Page: 45 / 162

-45-

v5.8

Radios

7.12. 3G/GPRS

Waspmote can integrate a 3G/GPRS module, with GPS incorporated, to enable communication using the mobile telephone

network.

•

Tri-Band UMTS 2100/1900/900MHz

•

Quad-Band GSM/EDGE, 850/900/1800/1900 MHz

•

HSDPA up to 7.2Mbps

•

HSUPA up to 5.76Mbps

•

TX Power:

UMTS 900/1900/2100 0,25W

GSM 850MHz/900MHz 2W

DCS1800MHz/PCS1900MHz 1W

•

Sensitivity: -106dBm

This module can carry out the following tasks:

•

Support microSD card up to 32GB

•

64MB of internal storage space

•

Making/Receiving calls

•

Making ‘x’ tone missed calls

•

MS-assisted, MS-based or Stand-alone GPS positioning

•

Sending/Receiving SMS

•

Single connection and multiple connections TCP/IP and UDP/IP clients

•

TCP/IP server.

•

HTTP and HTTPS service

•

FTP Service (downloading and uploading files)

•

Sending/receiving email (SMTP and POP3)

Note:

The SIM card can be installed by the user thanks to the External SIM socket, keeping the warranty valid.

All information about their programming and operation can be found in the 3G/GPRS Networking Guide available at the

Development section of Libelium website.

Summary of Contents for waspmote plug & sense



































































































































































Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands

Libelium waspmote plug & sense, Technical Manual

Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands